700 Class Thermal Interface

The eGraf™ 700 Class of thermally

conductive interface materials is designed

for use in applications requiring high

thermal conductivity, low clamping loads

and low contact resistance.

eGraf 700 Class products are manufactured entirely from natural graphite with no fillers or binders.

The conformable nature of eGraf 700 Class products optimizes the thermal conductivity properties at low system loads.

eGraf 700 thermal interface is an excellent replacement for thermal grease or phase change materials. No release liner is required. Typical applications include DC to DC converters, microprocessors, and hot and cold plates.

This information is not to be taken as a warranty of representation for which we will assume legal responsibility nor permission or recommendation to practice any patented invention without license. It is offered solely for your consideration, investigation and verification.

eGraf^TM is a trademark of Graftech Inc.

Graftech Inc. Phone 1-800-253-8003, In Ohio, 1-216-529-3777 FAX 1-216-529-3922

Issued July, 2001 Revision A

TYPICAL PROPERTIES OF eGraf 700 Class Materials

Property Typical Value Test Method

Physical

Color Dark Grey Visual

Thickness 0.003 in. (0.076 mm) Calibrated Micrometer

0.005 in. to 0.060 in. 0.005 in. increments

(0.127 mm to 1.52 mm) 0.127 mm increments

Tensile Strength 750 psi (6.9 MPa) ASTM F-152

Thermal

Operating Temperature -240 to 450 °C (-400 to 842 °F)

Thermal Impedance 0.03 °C•in²/W Modified

(0.005 in. product) (@ 50 psi or 345 kPa) ASTM D 5470

Thermal Conductivity

z direction 7 W/m•K Modified

x-y direction 200 W/m•K ASTM D 5470

Electrical - typical values

Resistivity (x-y direction) 10 μohm•m ASTM C611

Resistivity (z direction) 100 μohm•m ASTM C611

Options

All eGraf 700 class products are available with or without a pressure sensitive adhesive (PSA), in sheet, roll or die cut form.

eGraf Thermal Interface Ordering Information

7WW - X